femCalc - Ic

IC, $Q$ , $p_{u}$ , $p_{d}$

Defines the fluid initial conditions. If you want to set the initial conditions by this command, then parameter $ic$ of the command PAR, FLUID2 has to be set to IC_COMMAND.

Parameter	Typical value	Description
$Q$	$0.0001968 m^{3} \cdot s^{-1}$	initial flow-rate
$p_{u}$	$3878.4 Pa$	initial pressure at the beginning of the flexible tube
$p_{d}$	$3876.4 Pa$	initial pressure at the end of the flexible tube

IC, Q, pu, pd

IC, $Q$ , $p_{u}$ , $p_{d}$